S-25 Wireless Vibration Sensor

Our S-25 Vibration Sensor is ideally suited to continuous real time monitoring of mechanical vibration.  As with all our sensors, data is relayed by our gateway over the internet in real time and can be viewed from any web browser.

• Range ± 2g with resolution down to 0.001g.  Optional ranges of ±4g or ±8g, please contact us for availability
• functions as a "acceleration peak hold" sensor capturing peak X, Y and Z acceleration during the sample interval.  This allows the user to establish a "normal baseline" and receive alarm emails when vibration exceeds the user defined alarm thresholds.  Typical sample interval is 60 seconds and can be changed "over the air" while the sensor is online.
• 400 Hz sample rate
• 550 μg/√Hz Typical Noise Level
• ±0.5% Nonlinearity
• ±1.5% Cross Axis Sensitivity
• Operating temperature -20-50C
• Over The Air updates of
• Firmware
• Configuration, including sample period (ie time between samples), 
• Powered from 3.3VDC AC wall adapter
• mounting flanges for easy mounting to any surface
• data can be graphed against data from any other OmniSense sensor or sensor(s)
• alarm emails when measured acceleration value exceeds high or low thresholds or returns to normal range.
• FCC/CE approved
• Compact and wireless makes for an easy installation.

Comes with:

• 3.3 VDC AC Wall Adapter

Requires:

• Mounting Hardware
• OmniSense Gateway
• OmniSense Monitoring Account

Documentation

S-25 Quick Start Guide