Battery, Lithium 3.6 Volt ER14505

Long life Lithium Thionyl Chloride Battery, AA Size, ER14505. Most of our sensors use this battery. Use caution in buying these from local suppliers as they do not sell very many and their inventory may be old. While this battery has a very long (15-20 year) shelf life the issue is that it "hibernates" if it is not in use. Once it hibernates you have to wake it up before it can deliver sufficient current to properly power our sensors. To wake the battery up connect it to an ammeter and draw at least 100 mA, or in a pinch you can insert it into our sensor reverse polarity (aka backwards) for 10 seconds which forces the high current draw needed to wake the battery. We use a lot of these batteries so our stock is always fresh.
$5.99
PRICE BREAKS - The more you buy, the more you save
Quantity 1+ 20+
Price $5.99 $4.99

Long life Lithium Thionyl Chloride Battery,  3.6Volt, AA Size, ER14505, works with all of our battery powered sensors.

  • Dimensions (D x H) - 14.5 x 50.5mm
  • Maximum continuous current - 100mA
  • Typical weight - 19g
  • Nominal capacity - 2100mAh (2mA, 2V)
  • Nominal voltage - 3.6V
  • Operating temperature - -40 to 75 degrees Celsius
  • Maximum pulse current - 200mA
Customers who bought this item also bought

A-2 Moisture Probe

A-2 Moisture Probe, 2 meter cable with S-2 compatible plug in terminal block on one end and ring terminals on the other.
From $7.37

Mounting Screws for S-1 , S-10, S-11, S-16 and S-160 sensors

#12 x 2" 18-8 stainless steel mounting screws for S-1, S-10, S-11, S-16 and S-160 sensors includes screws and 18-8 stainless split washers. One pack includes 2 screws and 2 washers.
From $0.85

A-1-200 HumiSense Temperature and Humidity Probe, 2 meter cable, 8 centimeter probe

A-1 HumiSense Temperature and Humidity Probe compatible with OmniSense S-2 sensors. Miniature 3/16" (5mm) diameter probe cabled to a 3.5mm TRRS audio plug, ±0.3°C/±2.0%RH
From $39.95